Study of Pb-based and Pb-free perovskite solar cells using Cu-doped Ni1-xO thin films as hole transport material

SCAPS solar cell simulation program was applied to model an inverted structure of perovskite solar cells using Cu-doped Ni_1-xO thin films as hole transport layer. The Cu-doped Ni_1-xO film were made by co-sputtering deposition under different deposition conditions. By increasing the amount of the Cu-dopant, the film crystallinity enhanced whereas the bandgap energy decreased. The transmittance of the thin films decreased significantly by increasing the sputtering power of copper. High quality, uniform, compact, and pin-hole free films with low surface roughness were achieved. The structural, chemical, surface morphology, optical, electrical, and electronic properties of the Cu doped Ni_1-xO films were used as input parameters in the simulation of Pb-based (MAPbI_3-xCl_x) and Pb-free (MAGeI₃) perovskite solar cells. Simulation results showed that the performance of both Pb-based and Pb-free perovskite solar cell devices significantly enhanced with Cu-doped Ni_1-xO film. The highest power conversion efficiency (PCE) for the Pb-free perovskite solar cell is 8.9% which is lower than the highest PCE of 17.5% for the Pb-based perovskite solar cell.     

Probing the effect of R-cation radii on structural,vibrational, optical,and dielectric properties of rare earth (R=La,Pr, Nd) aluminates

The present study correlates the effect of R-cation radii on structural, vibrational, optical, and dielectric properties of rhombohedral rare earth aluminates RAlO₃ (R = La, Pr, Nd). The polycrystalline samples of RAlO₃ have been synthesized using sol-gel synthesis technique. Pure rhombohedral phase of RAlO₃ samples has been confirmed with X-ray diffraction. Systematic decrements in the lattice parameter, bond length, and bond angle have been observed, giving rise to structural distortion due to decrease in ionic radii of R-cation. The phononic properties of RAlO₃ have been investigated through Raman spectroscopy, where the degree of distortion of AlO₆ octahedra can be analyzed with the peak position of E_g and A_1g modes. An increase in the energy bandgap with decreasing R-cation radii shows an interconnection with the decrease in Al–O bond length. Interestingly, the decreasing dielectric constant with decreasing ionic radii of R-cation has been correlated with the difference in electronegativity of cation(R³⁺)-anion(O^2?) pair. Also, a positive linear relationship between dielectric constant and energy bandgap has been investigated using Penn model.     

基于信任链的骚扰电话预判技术研究

当前,骚扰电话乱象屡禁不止,严重影响了人民群众的正常生活,甚至威胁到个人财产安全,因此简单有效地识别骚扰电话技术成为亟待解决的问题。区别于现有的对电话号码进行黑白名单标记、大数据分析等识别方法,提出基于信任链的骚扰电话预判技术,从可信度量的角度计算来电号码的可靠程度,并针对高危受害群体的典型应用场景进行分析,通过对骚扰电话的预判,降低其受到电话骚扰甚至电话诈骗的可能性。     

Thermodynamic assessment of the Ga–Se–Te system

In this study, the Ga–Te binary system was reassessed by means of the CALPHAD method using a modified lattice stability parameter for Te as well as experimental data for this binary system. The two-sublattice ionic solution model was applied for the liquid phase, and the intermediate phases were described by the sublattice model. A set of self-consistent thermodynamic parameters was optimized for all the phases in the Ga–Te binary system, which reproduced the phase diagram and the thermodynamic properties well. Using the reevaluated Ga–Te system, previously assessed Ga–Se system, and modified Se–Te system, a critical evaluation of the Ga–Se–Te ternary system was performed. The calculated vertical sections, isothermal sections, and liquidus projection agreed reasonably well with the experimental data. Immiscibility in the liquid phase was observed, and the origin of this behavior is discussed from a thermodynamic perspective.     

极限工况下的管网“互联互通”改进方案

在全国天然气管道“主干互联、区域成网”(以下简称“互联互通”)基础格局逐渐形成的背景下,天然气管网规模日益扩大、管道分支和气源增加,并且分布不集中、输送方向可变,使得输气方案更加灵活,可以更好地解决某些地域的供气紧张问题;但受现有站场和设备的限制,暂不能满足某些多线组合极限工况,使得“互联互通”的初衷难以全部实现。为了使得现有的各输气干线在实现“互联互通”之后可以满足更多的多线组合工况,在分析“互联互通”背景下M管网工况变化的基础上,研发了可以进行水力仿真和压气站方案制订的计算软件,并对3种极限工况下的不同输气量情况进行了可行性试算,进而基于试算结果提出了相应的管网改进建议。研究结果表明:(1)经验证,软件计算误差满足要求;(2)在M管道某处增设压气站或在某些输气站场配置压缩机组;(3) M管网改进调整后,可以完成大部分的多线组合极限工况,真正实现“互联互通”的输气方案。结论认为,该研究成果有助于推进全国天然气管网早日实现“互联互通”。     

氢气非预混燃烧的流场输运特性分析

采用高精度直接数值模拟的方法对氢气非预混燃烧流场进行了精细的预测.模拟所求解的控制方程为三维可压缩的无量纲形式的Navier-Stokes方程,采用六阶精度紧致差分格式,结合基于详细化学反应和输运过程的FGM化学反应机制,利用768个处理器核、共近4.53亿网格点进行了基于CPU的大规模高效并行计算,分析氢气非预混燃烧特性,并进一步探讨了浮力对氢气燃烧流场输运特性的影响.研究发现,由于氢气燃烧过程中产生不同扩散性质的化学组分,使燃烧过程中遵循优势扩散的行为.这将影响流场的输运特性和火焰不稳定性的形成.在浮力驱动的氢气优势扩散燃烧流场中,对流是质量、动量及热量输运行为的主要影响因素,而无浮力火焰中优势扩散主导着流场的输运特性.平均统计结果表明,有浮力和无浮力的燃烧流场中都可以捕捉到逆梯度输运现象,且浮力会促进逆梯度输运行为的发生.     

保险杠抗压分析流程自动化系统开发

为提升汽车保险杠抗压分析效率、减少重复性劳动、实现仿真分析流程的自动化，利用Python和VBS语言开发一套前、后处理自动化程序。此程序可实现RBE3单元创建、局部坐标系创建、载荷创建、头文件创建、后处理、结果诊断和报告编制等过程的自动化。实际应用结果表明，与传统人工分析相比，该程序可使仿真分析效率大幅提高。通过自动化程序进行仿真，不仅可以保证保险杠抗压分析的精度，同时还可以实现分析的标准化、保证分析的一致性。     

基于多尺度的贝叶斯模型显著性检测

针对传统基于贝叶斯模型的显著性检测算法存在准确率不理想的问题,提出了一种基于多尺度的贝叶斯模型显著性检测算法。通过超像素分割算法(SLIC)将原图分割成不同尺度的超像素,根据超像素边界信息得到背景种子,进而通过距离计算和多尺度融合得到背景先验;对原图进行颜色增强,采用Harris算子对增强图进行检测角点求得凸包,融合不同尺度下的超像素得到凸包先验;融合背景先验和凸包先验得到最终先验;利用颜色直方图和凸包计算似然概率;将最终先验和似然概率通过贝叶斯模型计算显著图。在公开数据集MSRA1000、ECSSD上与多种传统算法进行准确率和召回率对比,该算法有更好的表现。     

基于主动学习的离群点集成挖掘方法研究

离群点检测任务通常缺少可用的标注数据，且离群数据只占整个数据集的很小一部分，相较于其他的数据挖掘任务，离群点检测的难度较大，尚没有单一的算法适合于所有的场景。因此，结合多样性模型集成和主动学习思想，提出了一种基于主动学习的离群点集成检测方法OMAL（Outlier Mining based on Active Learning）。在主动学习框架指导下，根据各种基学习器的对比分析，选择了基于统计的、基于相似性的、基于子空间划分的三个无监督模型作为基学习器。将各基学习器评判的处于离群和正常边界的数据整合后呈现给人类专家进行标注，以最大化人类专家反馈的信息量；从标注的数据集和各基学习器投票产生的数据集中抽样，基于GBM（Gradient BoostingMachine）训练一个有监督二元分类模型，并将该模型应用于全数据集，得出最终的挖掘结果。实验表明，提出方法的AUC有了较为明显的提升，且具有良好的运行效率，具备较好的实用价值。     

面向连续查询的敏感语义位置隐私保护方案

针对连续查询位置服务中构造匿名区域未考虑语义位置信息导致敏感隐私泄露问题，通过设计[(K,θ)]-隐私模型，提出一种路网环境下面向连续查询的敏感语义位置隐私保护方案。该方案利用Voronoi图将城市路网预先划分为独立的Voronoi单元，依据用户的移动路径和移动速度，选择具有相似特性的其他[K-1]个用户，构建匿名用户集；利用匿名用户集用户设定的敏感语义位置类型和语义安全阈值，以及用户所处语义位置的Voronoi单元，构建满足[(K,θ)]-隐私模型的语义安全匿名区域，可以同时防止连续查询追踪攻击和语义推断攻击。实验结果表明，与SCPA算法相比，该方案在隐私保护程度上提升约15%，系统开销上降低约20%。